Opex Model 72, Руководство оператора

Страница: 45 / 104

Operation 45
Model 72™ Operator Manual
OPEX Corporation
4.5. Selecting a job
When logged on, use the Arrow buttons to navigate to SELECT JOB and press
the Enter button. The Select Job screen appears (Figure 4-13).
Figure 4-13: Select Job screen
Note: If there are a large number of jobs stored in the Model 72. there may be
additional steps, as explained in
“Locating a job when many are stored” on
page 65 .
5. Use the Arrow buttons to choose a job, and press Enter to select it. Based
on the job settings, there may be reminder instructions to set cutter
positions which will appear on the screen, as in this example (Figure 4-14):
Figure 4-14: Set Side Cutter position screen
6. Either perform the tasks requested on screen to properly set up the job, or
push the cycle button to begin running the job.