Opex Falcon+, Руководство оператора

Страница: 85 / 132

Working with Jobs 85
Operator Manual
OPEX Corporation
To use the Rescan Feeder with Multi-Feed detection in paused state:
1.
Select
Pause
on the run screen, the Rescan Feeder slot will start flashing
blue, press and hold the
Rescan Feeder
button until the Rescan Feeder slot
begins to flash rapidly.
2. Inject the item(s) one at a time into the slot.
3. When finished, press the
Rescan Feeder
button again. The slot will no
longer be illuminated, and feeding will resume at the auto feeder.
4.13.2. Using the Rescan Feeder in Reject Condition
In the occurrence of a reject condition, the run screen will display the condition
(Figure 4-21) and the Rescan Feeder slot will flash blue. The operator can
choose to continue without using rescan feeder, or press the rescan feeder
button to use the rescan feeder. Upon pressing the rescan button, the
displayed run screen condition will close. Pressing
Cancel
will stop the Job
being run.
Figure 4-21: Reject condition example
To use the Rescan Feeder without multi-feed detection with a reject
condition:
1.
When the Rescan Feeder slot is flashing, press the
Rescan Feeder
button,
the run screen dialog will close, and the slot will become lit a solid blue.