Opex DS2200, Руководство пользователя

Страница: 84 / 90

84 Statistics
DS 2200 User Manual - OPEX Corporation use only - not for distribution
The Jams section lists the reasons for the jams that occur.
Failed Saving
Image Results when there is an error trying to add or rescan a
piece to a batch.
Magnetic MICR
Response
Missing
Results when the software does not receive a response
from the magnetic MICR when it is expecting one.
Cannot
Process
Printer Data
Results when there is an error in sending the audit trail
information down to the printer.
Required Item
Expected
Results when an item is of the wrong priority to be scanned
in the current location within a transaction. (Structured
batches only.)
Only One Item
of this Type
Expected Results when only one item of the scanned item's priority is
allowed, and that required item is already present within the
batch. (Structured batches only.)
New
Transaction
Required
Results when a new transaction must be started in order to
add this item to the batch. (Structured batches only.)
Jamsorts
All input pieces immediately following a reject when the job
parameter "Stop Machines for Rejects" is set to something
other than 'No' until the reject is cleared. All input pieces
immediately following a jam until the jam is cleared.
Table 6: Reasons for jams
Duplicate Batch Detected
A batch could not be started because a batch
with the same name already exists.
Too Many Consecutive
Rejects
Results when the number of consecutive rejects
is greater than the machine parameter
maximum consecutive reject count.
Software Problem
Detected
Results when the controller receives invalid
information from the host or there is an assert or
exception within the controller.
Table 5: Reasons for rejected items (continued)