+
Press the Power button located
in the battery co
nsole
so
that
the
light illuminates.
+
If using the Power Cord, plug the cord into the connection
adjacent to
the power button
, securing by
turning
clockwise to lock into place.
+
Allow the simulator approximately two (2) minutes to
cycle through the powering up sequence.
6
+
Fill the reservoir on the hand pump with simulated blood.
+
Locate the blood fill port on the simulator’s
right waist
.
+
Attach the hand pump’s blood fill hose by snapping onto
the blood fill port. (Be sure the hose nozzle is free of
debris.)
+
Retract the handle and pump approximately three (3)
times or until the simululator’s blood reservoir is full.
4
Add Blood to the Simulator
Power On
+
Remove the cover on the upper left thigh to access and
open the compartment.
+
Attach the battery to the connector.
+
Reset the battery in the compartment.
+
Replace the cover.
5
Install Battery
T
CC
S
Male
QUICK START GUIDE
