3
opera-care.co.uk
|
0333 222 8584
|
DANGER
DANGER
Position the grab rail at a minimum of 320mm away from the head and
footboard to avoid potential entrapment.
When operating the profiling functions of the bed, do not hold on to the grab
rail, holding on to the grab rail whilst profiling may result in hand entrapment
and injury.
Always check that the grab rail is fully secure, ensure that the bolts are fully
tightened before use.
Regularly inspect the grab for signs of wear and damage on a monthly basis.
Check that the bolts are still secure.
If there is suspected fault or damage, take the grab rail out of service and
inform the person responsible.
This product is not designed to be used by children, failing to observe this
warning may result in creating hazards that can cause serious injury.
2.
Warnings and Safety Instructions
3
. Installation
The Opera Grab Rail is supplied fully assembled, four spacers are provided
for attaching the Opera Signature Comfort Side Skirt back over the Opera
Grab Rail and on to the bed frame.
To install, remove all bedding from the bed you want to attach the grab rail to,
this includes the side skirts, mattress, duvet and pillows.
Using an Allen key, loosen the two bolts (1) on the bracket of the grab rail (A).
Lift the bracket over the bed frame channel (B) and move into the desired
position. This is usually towards to headend of the bed.
The space between the headboard of the bed and the grab rail
must be a
minimum of 320mm (12.5”) to avoid entrapment.
Ensure compliance before
securing the grab rail.
Secure the grab rail in place by tightening the two bolts with an Allen Key until
they will not tighten any further.
The Opera Signature Comfort Side Skirts can be placed back over the grab
rail and fixed to the bed (see the Opera Signature Profiling Bed User Guide
and Technical Specifications V2 on further information on how to do this).
When fixing the Signature Comfort Side Skirts back over the grab rail and on
