Opera AMLETO IDRO, Руководство пользователя

Страница: 30 / 40

30 ENGLISH
*2ND TIME PERIOD SWITCH-ON
At this point, the second time period must be programmed.
The sequence to be followed is the same and is repeated as for the 1ST TIME PERIOD SWITCH-ON.
On this occasion it is only necessary to enter the time, for example start at 15:00 and Stop at 22:00 and to activate the days
Saturday and Sunday by setting them at "ON".
CONTROLS PROCEDURE:
Press the key 6, set clock WILL APPEAR.
Press key 2 until " SET CHRONO " is
displayed.
SET
CLOCK
SET CHRONO
1ST TIME PERIOD SWITCH-OFF
Use buttons 4-5 to enter the time
“ 12:00 ”, which corresponds to the
switch-off time of the 1st time period.
To confirm and continue programming,
press button 6. Press button 3 to go
back to the previous parameter.
STOP PRG1
12:00
ENABLE CHRONO
Press key 6,
ENABLE CHRONO
and
OFF
will appear.
Press key 4 to activate or deactivate the
CHRONO
function. Select
ON
.
ENABLE
CHRONO
ON
ENABLE 1ST TIME PERIOD DAYS
Use keys 4 and 5 to enable/disable
the days, 2 and 3 to scroll through
the days; the day of the week will be
displayed followed by
OFF
select from Monday to Elisirt in
ON
,
excluding Saturday and Sunday (OFF)
MONDAY..PRG1
ON-OFF
Press key 6 to confirm and continue
programming.
START PRG1 OFF will appear.
START PRG1
OFF
SET H2O TEMPERATURE 1ST TIME
SPAN
Press key 6 to confirm and continue
programming.
Use keys 4-5 to select the desired H2O
temperature.
(65-80°C)
Press key 6 to confirm and continue.
SET PRG1
75°C
1ST TIME PERIOD SWITCH-ON
Use keys 4-5 to enter the time “
8:00
”,
which corresponds to the switch-on
time of the 1st time period.
To confirm and continue programming,
press button 6. Press button 3 to go
back to the previous parameter.
START PRG1
08:00
2ND TIME PERIOD SWITCH-ON
At this point, the second time period
must be programmed.
The sequence to be followed is the
same and is repeated as for the 1ST
TIME PERIOD SWITCH-ON.
START PRG2
OFF
J
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, A BOX OF THE RELATIVE ICON WILL APPEAR ON THE
CONTROL BOARD.
PROGRAMMING EXAMPLE
Let's suppose that the weekly programmer function is to be used and 4 time periods are to be used in the following way:
1st time period: from 08:00 to 12:00 every day of the week excluding Saturday and Sunday
2nd time span: from 15:00 to 22:00 only on Saturdays and Sundays, both times with a 75°C water temperature setpoint
The display will show the various programming steps.
30