VS-AGU-E1M800-S User Manual
OpenVox Communication Co.Ltd URL:www.openvox.cn
16
Sending polarity
reversal(DTMF Only)
Send polarity reversal before sending the CID on the channel.
Start code(DTMF Only)
Start code.
Stop code(DTMF Only)
Stop code.
Figure 3-3-3 Hardware Gain
Table 3-3-3 Instruction of Hardware gain
Options
Definition
FXS Rx gain
Set the FXS port Rx gain. Range: -35, 0 or 35.
FXS Tx gain
Set the FXS port Tx gain. Range: -35, 0 or 35.
Figure 3-3-4 Fax Configuration
Table 3-3-4 Definition of Fax
Options
Definition
Mode
Set the transmission mode.
Rate
Set the rate of sending and receiving.
Ecm
Enable/disable T.30 ECM (error correction mode) by default.