OpenVox SWG-1016 Скачать руководство пользователя страница 53

Страница: 53 / 77

SWG-1016 User Manual

OpenVox Communication Co. ,LTD.

URL: www.openvox.cn

If the dialed number matches the patterns specified by the

subsequent columns, then this will be prepended before

sending to the trunks

prefix

: Prefix to remove on a successful match

The dialed number is compared to this and the subsequent

columns for a match. Upon a match, this prefix is removed from

the dialed number before sending it to the trunks.

match pattern

: The dialed number will be compared against the

prefix + this match pattern. Upon a match, the match pattern

portion of the dialed number will be sent to the trunks

CallerID

: If CallerID is supplied, the dialed number will only

match the prefix + match pattern if the CallerID has been

transmitted matches this.

When extensions make outbound calls, the CallerID will be their

extension number and NOT their Outbound CID.

The above special matching sequences can be used for

CallerID matching similar to other number matches.

Set the Caller ID Name

What caller ID name would you like to set before sending this

call to the endpoint.

Forward Number

What destination number will you dial? This is very useful when

you have a transfer call.

Custom Context

User-defined dialing rules

Failover Call Through

Number

The gateway will attempt to send the call out each of these in

the order you specify. You can create various time routes and

use these time conditions to limit some specific calls.

Figure 5-3

Time Patterns that will use this Route

If you configure like this, then from January to March, from the first day to the last day of these months,

from Monday to Thursday, from 00:00 to 02:00, during this time (meet all above time conditions), all calls

will follow this route. And the time will synchronize with your Sever time.

Figure 5-4

Failover Call Through Number

Содержание SWG-1016














































































Результаты поиска

Содержание SWG-1016

Отзывы:

Похожие инструкции для SWG-1016

Бренды по названию

Популярные бренды

OpenVox SWG-1016, Руководство пользователя

Результаты поиска

Содержание SWG-1016

Отзывы:

Похожие инструкции для SWG-1016

Бренды по названию

Популярные бренды