www.openvox.cn
2
Compliance information
EMI and EMS
For FCC, IPC120 has been tested as a CPU board, installed in an enclosure, with the
top cover removed. No further testing should be required if the board is used with
other FCC tested modular components. Please see http://www.fcc.gov/oet/ for more
details.
Testing for CE mark must be done at the level of the complete product. Please
contact OpenVox for assistance and documentation. It can be used as an I.T.E, as
well as a generic device. For an I.T.E, it must be tested according to EN55022 and
EN55024; for a generic device, it is suit for EN 61000-6-2 (EMI test for commercial
and light industrial environment) and EN61000-6-3 (Immuty test for Industrial
environment). The product has been tested both standards, and get a class B
evaluation. Selecting a CE verification adapter is important, and we can also provide
such adapter as customer’s required.it is suggest that 12V@5A is typical value
considering I/O peripheral.
ESD
For satisfactory resistance to electrostatic discharge events (ESD), the case of the
IPC120 board should be grounded earth Ground termintal. (eg. through the mounting
holes, or the serial port connector). Under this condition, the system can be get class
B evaluation according to EN 61000-4-2.
Recycling / disposal
Do not discard electronic products in household trash!
All waste electronics equipment should be recycled according to local regulations.
Information for the recycler
Please cut off Lithium battery, if present, for separate recycling.
OpenVox enclosures are made of aluminum.
