Hardware installation guide
OpenVox Communication Co. Limited URL :
http://www.openvox.cn
5
1.
Compliance Information
1.1 EMI and EMS
For FCC, OpenVox IPC100 has been tested as a CPU board installed in an enclosure.
No further testing is needed if the board works with other components FCC qualified
Please see
for more details.
CE must be done at the level of completed. Please contact OpenVox for assistance
and documentation. OpenVox IPC100 can be used as an I.T.E, as well as a generic
device. As an I.T.E, it must be tested and passed according to EN55022 and EN55024;
as a generic device, it applies to EN 61000-6-2 (EMI test for commercial and light
industrial environment) and EN61000-6-3 (Immunity test for industrial environment).
OpenVox IPC100 meets both two measuring standards with class A result, specially
the class A for emission. OpenVox will provide Class B products in the future. Also,
we will offer adapter with CE verification if customers require. It is suggested that
12V@5A should be typical value considering I/O peripheral.
1.2 ESD
For satisfied resistance of electrostatic discharge events (ESD), the case of OpenVox
IPC100 board should be grounded earth Ground terminal. (E.g. Through the mounting
holes, or the serial port connector). Under this condition, the system can get class A
evaluation according to EN 61000-4-2, or the system may get class B evaluation.
1.3 Recycling and disposal
Do not discard electronic products in household trash!
All waste electronic equipment should be recycled according to local regulations.
Information for the recycler:
Please cut off Lithium battery, if present, for separate recycling.
OpenVox enclosures are made of aluminum.
