User Manual
D.
Power Feeding Input
If one of the eight power feeding connectors is CONNECT(ON), user
should connect a D-type connecter from pc power supply to this jack,
the D-type connecter is used to provide power to CDROM ahd 3.5”HDD.
E.
Power Supply Selection
Some latest model PCs do not p5V on the PCI slots. If user uses
those kinds of PCs, user has to set the jumper to 3.3v.
F.
PCM IN/PCM OUT
These are for future usages.
2)
Power off PC, remembering unplug the AC power cable
3)
Insert B800P card into a 3.3v or 5.0v PCI slot
4)
Plug the hard disk power supply cable( D style) to power feeding input jack
if needing providing power to external equipments, please refer jumper
setting section for the detail
5)
Plug back the AC power cable, and power on PC
If user wants to know the details about hardware configuration of B800P, please refer
hardware setting section.
2.
Software Installation and Setup
B800P
supports
original
mISDN
driver
form
http://www.misdn.org/index.php/Installing_mISDN. Customers can download it
from that URL. There are few steps to install the driver.
1) Checking the B800P hardware by command: lspci -vvvvvvvvv
2)
Checking the supporting packages
Note that if there is no kernel source in the system, user should install
them. User can run yum again:
yum install kernel-devel
`. If user uses this
command yum will install the sources for your current version of the kernel.
It is time to check for the availability of some other packages:
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
