A1200P on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
16
01:02.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Device 9500:0003
Control: I/O+ Mem+ Bu SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at dedff000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0
PME-
Kernel modules: opvxa1200, hisax
Figure 5 Hardware detection
If A1200P is not recognized by the system, you have to power off and
take out the card, then try to insert it into other PCI slot.
2. Software installation
Some dependencies are crucial. If any of them is absent, the software
installation process would not go through successfully. Let’s run
"
yum
install XX
"
(XX stands for the dependency’s name) to check the
availability of dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
