Free To Air / Conax Embedded Digital Terrestrial Receiver
MENU OPERATION
17
Free To Air / Conax Embedded Digital Terrestrial Receiver
MENU OPERATION
16
6.3.2 PARENTAL CONTROL
This function prevents children or unauthorized persons
from watching programs.
Also you can change PIN(Personal Identification
Number) code.
Select "Parental Control" menu in "Installation" menu,
and the following screen will be displayed.
3. A. Receiver Lock
To lock the receiver, select "Receiver Lock" in the
"Parental Control" menu and change it to "On" mode
using the left/right keys(
◀∙▶
).
3. B. Menu Lock
To lock the Main Menu, select "Menu Lock" in the "Parental Control" menu and change it to "On"
mode using the left/right keys(
◀∙▶
).
3. C. Change PIN Code
You can change your PIN code from factory default value "0000" as follows:
Select "Change PIN Code" in the "Parental Control" menu using the left/right keys(
◀∙▶
).
Press the "OK" key. Then you will be asked for a new PIN code.
Once you enter a new PIN code, the receiver will ask you to enter in again.
After you enter a new PIN code twice, the PIN code is changed permanently.
If you forget the PIN code, you have to contact the distributor to find out it.
6.3.3 RECEIVER UPGRADE
You can upgrade the software of this receiver through serial port when the new software is
released.
Please contact the distributor for receiver upgrade.
Distributor supports you useful information and new software for the receiver.
6.3.4 FACTORY DEFAULT
This is to restore the factory set values in case the user has encountered some problems after
changing any new values of channel data and others which may be in error.
Select "Factory Default" menu in "Installation" menu, and press the "OK" key.
If you want to continue, select the "Yes" cell.
The receiver will be reset to settings automatically.
Please note that the "Factory Default" procedure may take a few minutes.
6.4. SYSTEM SETTINGS
This menu helps you to set up video output mode,
language, screen type
Select "System settings" menu in main menu, and the
following screen will be displayed.
Press the "menu" key or "exit" key to return to previous menu.
TV Select
: Select video output mode - CVBS or RGB
RF Channel
: Select or change RF channel number when your receiver is connected
to TV by RF connector. The factory preset value is channel 38.
RF Mode
: In the above case, you can choose PAL B/G mode or PAL I mode or PAL
D/K mode.
Screen Type
: You can choose either 4:3 or 16:9 according to the TV type.
Menu Transparency : You can select the transparency of the menu.
Menu Language
: You can select the menu language.
Audio Language
: You can select the audio language.
OSD Color
: You can choose the OSD color.
