www.openplan.com | [email protected] | 844.OPS.OPS1 | REV 03.11.21
DSH-L DESK SCREEN DIVIDER
ASSEMBLY GUIDE
Install Surface Bracket to a Corner Bracket using (2)
provided screws.
1.
Surface Bracket is attached
beneath work surface with
self-tapping screws.
Install Corner Bracket at the top where two screen
corners meet by sliding screen edge into bracket
channel. Tighten bolt to secure. Install Surface
Bracket below work surface with self-tapping
screws. Slide screen edge into bracket channel
and tighten bolt to secure.
2.
Install Clamp Bracket at the end of each screen
run. Clamp Bracket is installed with self-tapping
screws. Tighten knob to secure screen.
When installing Clamp Bracket,
adjustment knob should be facing
inside the work surface.
3.
Clamp Bracket
Surface Bracket
Corner Bracket
NOTE:
24mm PET board required.
