b. Click on the Add ACU Expansion Board dropdown, select Openpath
ACU , and click Add
c. Click Save
6. Hold down the ADMIN button for three seconds
7. In the Control Center, click the blue Register next to the name of your ACU
8. Click Yes to proceed
9. A new window will open, click Provision
10. If you see a "This Site Cannot be Reached" error, you need to ping the ACU
using the command line:
a. Open a command prompt and run:
i.
On Windows:
ping
oppi.local
ii.
On Mac or Linux:
ping
-c4
oppi.local
●
If nothing returns, check your network requirements. See
NETWORK REQUIREMENTS
.
b. You should see the ACU's IP address (either in IPv4 or IPv6 format). Copy
the address and return to the error page.
c. In the URL, delete everything before :8080
i.
If using an IPv4 address, paste before :8080. For example:
192.0.2.0:8080
ii.
If using an IPv6 address, delete the last two digits and the
percentage sign, put square brackets outside the address, and
paste before :8080.
●
Correct:
[a123::b456:5a18:eb8f:7fd6]:8080
●
Incorrect:
a123::b456:5a18:eb8f:7fd6%29:8080
iii.
Hit Enter , then click the Provision button
iv.
If the Provision button still doesn't appear, contact Openpath
Support at (844) 673-6728 Ext 2 or
.
NETWORK SETTINGS
In the Open Admin app, you can configure network settings for the ACU.
To change network settings:
1.
Connect to the ACU by pressing the Admin button again if needed
2.
Tap on Network Settings
3.
Select Configure network manually
4.
Configure the network settings as needed — set a static IP address or set a
preferred DNS server
5.
Tap Save on the top right of the screen
Version 1.8
©
Openpath 2020
Page 32
All manuals and user guides at all-guides.com
