SD4008 Quick Start (520007 Rev 2.2)
Page 3
Enter local
IP address/ DNS Name
of the computer/appliance and edit the
Permitted
Services
(or TCP/UDP port numbers) that are authorized to be used in controlling this
host. Only these
permitted services
will be forwarded through by SDT to the Host. All other
services (TCP/UDP ports) will be blocked. You may also specify The level of information to
be logged and monitored for each Host access
Set up Users
Select
Serial & Network: Users & Groups
. Click
Add User
and add Usernames and
Passwords for each new user (and which serial and host ports they can access.
Nominate
Accessible Hosts
and
Accessible Ports
to specify which serial port and which
LAN connected host the User is to have access to. You may also specify if the User is to
be a member of a group. By default new Users will be in the
user
group (refer the
User
Manual
for details). Click
Apply
OPENGEAR END USER LICENSE AGREEMENT
YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THE ACCOMPANYING SOFTWARE, THE
USE OF WHICH IS LICENSED FOR USE ONLY AS SET FORTH BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF
THIS AGREEMENT, DO NOT USE THE SOFTWARE. IF YOU USE ANY PART OF THE SOFTWARE, SUCH USE WILL INDICATE THAT YOU
ACCEPT THESE TERMS.
You have acquired a product that includes Opengear (“Opengear”) proprietary software and/or proprietary software licensed to Opengear. This
Opengear End User License Agreement (“EULA”) is a legal agreement between you (either an individual or a single entity) and Opengear for the
installed software product of Opengear origin, as well as associated media, printed materials, and “online” or electronic documentation (“Software”).
By installing, copying, downloading, accessing, or otherwise using the Software, you agree to be bound by the terms of this EULA. If you do not
agree to the terms of this EULA, Opengear is not willing to license the Software to you. In such event, do not use or install the Software. If you have
purchased the Software, promptly return the Software and all accompanying materials with proof of purchase for a refund.
Products with separate end user license agreements that may be provided along with the Software are licensed to you under the terms of those
separate end user license agreements.
LICENSE GRANT
. Subject to the terms and conditions of this EULA, Opengear grants you a nonexclusive right and license to install and use the
Software on a single CPU, provided that, (1) you may not rent, lease, sell, sublicense or lend the Software; (2) you may not reverse engineer,
decompile, disassemble or modify the Software, except and only to the extent that such activity is expressly permitted by applicable law
notwithstanding this limitation; and (3) you may not transfer rights under this EULA unless such transfer is part of a permanent sale or transfer of the
Product, you transfer at the same time all copies of the Software to the same party or destroy such materials not transferred, and the recipient
agrees to this EULA.
No license is granted in any of the Software’s proprietary source code. This license does not grant you any rights to patents, copyright, trade
secrets, trademarks or any other rights with respect to the Software.
You may make a reasonable number of copies of the electronic documentation accompanying the Software for each Software license you acquire,
provided that, you must reproduce and include all copyright notices and any other proprietary rights notices appearing on the electronic
documentation. Opengear reserves all rights not expressly granted herein.
INTELLECTUAL PROPERTY RIGHTS
. The Software is protected by copyright laws, international copyright treaties, and other intellectual property
laws and treaties. Opengear and its suppliers retain all ownership of, and intellectual property rights in (including copyright), the Software
components and all copies thereof, provided however, that certain components of the Software are components licensed under the GNU General
Public License (version 2), which Opengear supports. You may obtain a copy of the GNU General Public License at
http:/www.fsf.org/copyleft/gpl.html. Opengear will provide source code for any of the components of the Software licensed under the GNU General
Public License upon request.
5
