CMS6100 Monitor Quick Start (520031-Rev 1.0)
Page 1
CMS6100
Quick Start Guide
Thank you for purchasing the CMS6100 centralized monitoring system (
Monitor). This
Quick Start walks you through installation, configuration and local operation. For more
details please refer to the
User Manual on the CDROM.
Step1 Check kit contents
CMS6100
Monitor
This Quick Start & CD-ROM
Power cable
Step 2 Connect the CMS6100 hardware
Plug the CMS6100 into the AC mains
Connect the CMS6100 to your management
network
Step 3 Set up the CMS6100 Monitor
The default Monitor IP Address is
192.168.0.1 (subnet mask 255.255.255.0). With a web
browser on any computer that is LAN connected to the Monitor:
Enter
https://192.168.0.1
into the address bar
Note:
The LAN connected computer must have an IP address in the same
network range (192.168.0.xxx) as the Monitor. If this is not convenient,
you can use the
ARP Ping command to set the IP address (refer User
Manual or online FAQ for details). The Monitor also
has its DHCP client
enabled by default, so it will automatically accept any network IP
address assigned by any DHCP server on your network – and will then
respond at both 192.168.0.1 and its DHCP address.
Log in using the default system user name
root
and the default password
default. An Opengear
Welcome
screen listing the basic configuration steps is
displayed
