ACM5000-GV Quick Start (520029-Rev 1.7)
Page 2
Enter
https://192.168.0.1
into the address bar
Note:
The LAN connected computer must have an IP address in the same network range
(192.168.0.xxx) as the
ACM5004-GV
. If this is not convenient, you can use the
ARP Ping command to set the IP address. Refer to the User Manual or online FAQ
for details. The
ACM5004-GV
also has DHCP enabled by default, so it will
automatically accept any network IP address assigned by any DHCP server on
your network. It will then respond at both 192.168.0.1 and its DHCP address.
Log in using the default system user name,
root,
and the password,
default.
A
Welcome
screen listing the basic configuration steps is displayed
It is recommended that you set up a new Administrator user (in the
admin
group with
full access privileges) and login as this new user for all ongoing administration functions
(rather than continuing as root).
Select
System: Administration
. Enter and confirm a new
System Password
and click
Apply
To assign your ACM5004-GV a static IP address or to permanently enable DHCP
on the primary Ethernet network, select
System: IP
then
Network Interface
and check
DHCP
or
Static
for
Configuration Method
. Leave the
Failover
Interface
set to
None
To configure the ACM5004-GV
console server
features:
Configure the serial port settings and enable the desired protocols and logging
levels via
Serial & Network: Serial Port
.
You may also enable SSH tunneled access through the ACM5004-GV to locally
networked devices (
hosts
) using
Serial & Network: Network Hosts
Configure user access to serial ports via
Serial & Network: Users & Groups
Step 4 Connect the cellular modem
Select the
Internal Cellular Modem
tab on the
System: Dial
menu
The ACM5004-GV supports both OTASP (
Over-the-Air Service Provisioning
where
modem specific parameters can be retrieved via a call to a special phone number)
and a manual process where the phone number and other parameters can be
entered manually.
o
For OTASP, enter *22899 as the number to be dialed (for Verizon)
o
For manual activation enter the
MSL
,
MDN
and
MSID
values. Verizon
have been known to use an
MSL
o
f 000000
and the phone number
assigned to the ACM5004-GV as both the
MDN
and
MSID
