33748AG
17
Picture Adjustment
Each of the Picture Adjustment settings is set to the recommended default.
Brightness –
Adjust the image’s brightness on the camera. The Backlight value is
adjustable from
0
(dim) ~
+20
(brightest).
Sharpness –
Increasing the sharpness level can make the image looked sharper; it
especially enhances an object’s edge. The value of sharpness is adjustable from
0 ~ +10
(sharpest).
Contrast–
Adjust the contrast value from
-6 to 19
.
Saturation–
Adjust the color saturation from
-6 to 19
(most saturation)
.
Hue–
Adjust the hue from
-12 to 13
.
Backlight–
Backlight compensation can correct for overly-bright backlit sceneries.
Note
Backlight is only enabled by selecting TV System setting to 60 fps (NTSC).
WDR Function–
Turn the Digital Wide Dynamic Range Off, or adjust between
Low/Mid/High.
Click
Set
after making changes to the Picture Adjustment settings to save the settings and
update the Live screen.
Motion Detection
Use the Motion Detection menu to configure the motion detection areas. Here, Motion Detection
can be turned On or Off, and other general settings can be specified.
To enable motion detection:
1.
Use the
Motion Detection
dropdown to select a motion detection preset (1-4). If choosing
an additional preset after 1, select the
On
radio button.
Note
A motion detection preset can be turned
Off
at a later time.
2.
If desired, select the
By Schedule
radio button and use the dropdown menu to select a
schedule.
3.
Designate the
Motion Detection Setting
values.
4.
Check the appropriate boxes to designate the
Triggered Action
.
5.
Click
Save
.
