CONTENTS
Selecting multiple cameras and enter-
ing IP address 192.168.51.2 will set
an IP address on all selected cameras,
starting at 192.168.51.2 and increase
per camera.
1.
Open the Network Camera
Manager application.
2.
Select applicable camera(s).
3.
Input starting IP address, Subnet
Mask, Gateway, DNS.
4.
Apply changes.
5.
Wait 60 seconds before refreshing
NCM.
OE-C2012B4
Bullet Camera
PRODUCT FEATURES
Self-Tapping
Screws &
Plastic Anchors
Quick Start
Guide
Mounting Template
ASSIGNING AN
IP ADDRESS
OpenEye IP cameras are set to DHCP
by default. If a DHCP server is not
detected after 4 minutes, the camera
will default to IP address 192.168.51.2.
If you are not using a DHCP server,
NCM will allow you to batch confi gure
a static IP address.
The IP address for the camera network
on your Apex recorder is 192.168.51.1.
NOTE:
To change this IP address please refer
to your Apex recorder manual.
CONNECTING TO THE
IP CAMERA
To access the camera setup menu,
you need to open Network Camera
Manager (NCM) utility. NCM is pre-
installed on all OpenEye Recorders,
and is also available for download on
the OpenEye website for installation on
your personal computer or laptop.
1.
Open Network Camera Manager.
2.
Locate your camera on the
Network Camera Manager list.
3.
To open the web browser, select
the camera and click LOAD.
NOTE:
OpenEye IP cameras ship
without a default password.
DEFAULT USERNAME
AND PASSWORD
The admin user password can be set
using the following methods:
1.
OpenEye recorders running Apex
2.1 or newer will automatically set
a new unique password if:
•
Connected to an M-Series
recorder with a built in PoE
switch.
•
Connected to a network
switch through the
camera network port
and selected then added in
setup, if a new password has
not already been set.
NOTE:
The NCM software manual can be
found at
https://www.openeye.net/
ncm-manual
INSTALLATION
1.
Apply template sticker to desired
camera location.
2.
Drill anchor holes using included
mounting template.
3.
Remove mounting template.
4.
Insert anchors.
5.
Mount camera.
6.
Connect network cable with
included waterproof cable
connector.
7.
Adjust camera view.
Camera
Maximum Resolution
2688x1520
Frame Rate at
Maximum Resolution
30FPS @ 4MP H.264/H.265
Total Streams
Dual Streaming
ONVIF
Profi le S / G / T Compliant
Day/Night
True Day / Night
Wide Dynamic Range
True WDR
Environmental and Power
Power
Consumption
9.5W Max
Input Voltage
12vDC / PoE
Operating Temperature
-22°~140°F (-30°~60°C )
IP Rating
IP67
Waterproof Cable
Connector
2.
Connect to the camera directly
through a Web Browser and follow
the onscreen prompts.
3.
Use the Network Camera Manager
(NCM) Utility.
Username:
admin
Set the Default Camera Password
Use the QR code or link for instructions on
defi ning a unique camera password:
https://www.openeye.net/support/faqs/
default-camera-password
