OpenEye OE-C1012D2 Скачать руководство пользователя страница 8

Страница: 8 / 44

Introduction

OVERVIEW

The OE-C1012D2 is a compact outdoor IP mini dome with crystal clear 2MP resolution, true WDR, and

smart video compression for improved streaming performance and recording retention. With a vandal

resistant IK10 housing the OE-1012D2 is suitable for installation on low ceilings and in public spaces.

Adaptive IR technology ensures the camera can capture images in low light without overexposing

subjects of interest and losing important detail. The OE-C1012D2 is compatible with a broad range of

available mounting accessories to fit any application, stands up to the elements with an IP67 rated

housing and operates down to -31°F for even the most extreme cold weather installations. Additional

connection for audio in/out and sensor I/O connections make this camera an excellent choice for pairing

with OpenEye Web Services remote monitoring and two-way audio capabilities. The OE-C1012D2 is an

excellent choice for users looking for an affordable IP mini dome that is big on features.

The OE-C1012D2 is ONVIF™ profile S/G/T compliant and fully compatible with the OpenEye Web Services

platform, allowing multiple users to concurrently view high quality images and perform remote setup

using a Web browser.

PRODUCT FEATURES

•

NDAA Compliant

•

2.8mm Fixed Lens

•

2MP resolution at up to 30 FPS

•

True WDR

•

Adaptive IR, up to 98' range

•

Smart Compression

•

Audio in/out, sensor, and relay connections

•

Edge Storage (up to 512GB MicroSD card)

•

IP67 Ingress Protection Rating

•

IK10 Impact Protection Rating

•

Optional Paintable Dome Cover (Free Upon Request)

Содержание OE-C1012D2













































Результаты поиска

Содержание OE-C1012D2

Отзывы:

Бренды по названию

Популярные бренды

OpenEye OE-C1012D2, Руководство по оборудованию

Результаты поиска

Содержание OE-C1012D2

Отзывы:

Бренды по названию

Популярные бренды