iConnectAccess624
Technical Reference
www.opennw.com
12
For Windows
®
2000 / Windows
®
XP
NOTE:
Please note that these instructions may vary, depending on whether this is
the first time you are configuring your Ethernet Driver in Windows. Those
below are for first-time configurations.
Windows® 2000:
step 1
From your Windows desktop, click
Start > Control Panel
.
step 2
From the
Control Panel
window, double-click the
Network Connections
icon.
step 3
At the
Network Connections
window, right-click on the
Local Area
Connection
icon and click
Properties
.
step 4
Proceed from step 3 in the Windows XP Ethernet Driver Configuration
Procedure below.
Windows® XP:
NOTE:
Instructions are based on the default
Start
menu option.
step 1
From your Windows desktop, click
Start > Control Panel
.
step 2
From the
Network Connections
window, right-click on the
Local Area
Connection
icon and select
Properties
.
step 3
In the
Properties
window of the LAN connected, ensure that the
Connect
Using
field indicates the model of the Ethernet Card connected to your
iConnectAccess624.
NOTE:
This is important especially if you have more than one Local Area Connection
icon displayed in the
Network Connections
window. Ensure that you have
selected the correct one.
step 4
From the
This connection uses the following items:
area of the
Properties
window, select
Internet Protocol (TCP/IP)
and click
Properties
.
step 5
From the
General
tab of
Internet Protocol (TCP/IP) Properties
window,
highlight the
Obtain an IP Address Automatically
radio button, and click
OK
.
step 6
Click
OK
again to close the dialog.
step 7
Ensure that your iConnectAccess624 is powered on. Restart your system
when prompted.