6
STEP 1: SET UP SCREEN STANDS
Remove screen stands from protective bags and place about five
and a half feet apart.
A. Loosen lower adjustment knob as pic-
tured above, turning counter clockwise. Be
careful not to over-tighten knobs! Doing
so can damage stands.
B. Grab one of the three legs, and push
down until support arms are horizontal
to the ground, as pictured above. Tighten
knob, turning clockwise.
There are two positions that are possible when placing your screen on your
stands - a low and a high position.The high position is recommended when
you have more people, and therefore when you desire greater visibility of
the movie.
C. For low position skip C and D, For high
position, loosen top adjustment knob
counterclockwise.
D. Then, raise loosened pole until it’s just
above the third hole (as pictured above),
and tighten adjustment knob clockwise.
SET UP SCREEN STANDS
