Opatra SYNERGY NECK, Руководство пользователя

Страница: 9 / 12

8
4. Remove the protective cover from the device.
5. Lift your Synergy Device from the docking station and switch the device ON by
pressing down the control button (bottom round button) for 2 seconds. The
yellow LED light indicator will illuminate on the hand piece, along with the low
infrared mode.
6. Click the top round button and select the colour LED light you require.
7. Begin your session – ready to use.
8. Place the CURVE head surface onto your skin and the selected LED Light and
infrared mode, as well as heat and vibration mode (low humming sound), will
automatically activate.
9. Select the mode according to your preference (RED – BLUE – GREEN)
10. To switch from RED LED LIGHT to GREEN LIGHT LED to BLUE LED LIGHT
in-between sessions – press and hold down the top control button (1 second).
11. Apply light pressure, whilst slowly moving the Synergy Neck Device in slow,
sweeping, upwards motions.
12. Treat the desired area for approximately 5 – 7 minutes, on each side.
13. When you have completed the session, TURN OFF your device by pressing and
holding down the control button (bottom button) for 2 seconds. The indicator
lights will turn off.
14. It’s recommended that after treatment, to apply a small amount of moisturising
cream onto the treated area after each session.
15. After each use, clean the Opatra Synergy Neck Device with the OPATRA
cleansing cloth provided or with sterilise wipes on the stainless-steel treatment
head. Dry with a soft dry cloth or paper towel and return to the docking station.
neck & CHEST