Opale Parachutes SAFETECH 3.2K ST60, Руководство пользователя

Страница: 14 / 15

SAFETECH ST60 SAFETECH ST60
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-aerosystem.com +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
Initiating and standby procedures
Initiating procedure Standby procedure
Switch on your transmitter and make sure that the
trigger button is on the locking position.
Place the “Remove Befor Flight“ in the arming rod
hole.
Power up the receiver or the autonomous trigger
module. Check the binding / radio pairing.
Disconnect the receiver from the battery or from the
autonomous trigger module.
Remove the “Remove Before Flight” pin. Switch off the transmitter.
In order to guarantee the kit is efficiently operating and for an optimal lifespan, we recommend you to make
the following safety inspections and the following maintenance operations:
Parts Inspections periodicity Actions
- Servomotor 20 deployments Check the good working without
the pin. No sprocket is dammaged.
Replace if necessary.
- Piston line 10 deployments Preventive replacement.
- Piston line 1 deployments Visual verificiation of non rupture.
- Parachute 1 deployments Make a folding.
- Parachute 50 deployments Check the good condition of the lines
and fabrics.
- Parachute 100 deployments Send it to our workshop for a com-
plete inspection.
- Parachute 200 deployments Preventive replacement.
- Parachute 2 months If the parachute is not used for a 2
months period, make an unfolding
and a complete folding.
- Spring 50 deployments or 1 year Preventive replacement.
- Tube 1 deployments Check the tube, the base must not be
detach from the tube.
These operations can be done at our workshop.
Please contact your Opale Parachutes team.
Maintenance
14