3
Rated voltage
220-240V~ 50/60Hz
Rated power
1500W
Protection class
Class I
Power cable
H05RN-F,3×0.75m
2
Cable length
1.5m
No. Of fins
7
3.
PARTS DESCRIPTION (Fig A)
1)
1 - Carry Handle
2)
2 - Power indicator
3)
3 - Power Selector
4)
4 - Thermostat Control
5)
5 - Cord storage
6)
6 - Metal axle & Casters
Description
Drawing
Quantity
Caster
4
U-shape Bolt & Wing Nut
2
Castor Bracket
1
Castor Assemblies
1
4.
INSTALLATION
Fig B
1)
Wheel assembly installation:
Do not operate the heater without the wheel attached to the bottom of the unit. Otherwise it may result in a fire hazard.
2)
Unscrew nut and washer from casters.(Fig B-1)
3)
Attached casters with two metal axles with washer and nut.
4)
Turn the heater upside down for ease of assembling
5)
Place the metal axle and wheel assembly between the last two fins at each end of the heater as shown in figB-3,4,5
6)
Attached the axle and wheel assemblies onto the heater with the U bolts and wiring nuts supplied as shown in fig B-3,4,5
7)
Remove the wiring nut from the U bolt and insert the U bolt through the holes in the axle and wheel assembly as shown,
reattach the wing nut and tighten firmly.
8)
Turn the heater to its upright position for operation. The heater is upright when the handle and controls are at the top of
the unit(fig C)
