4. OPERATION INSTRUCTIONS
1) Choose a suitable location for the heater, taking into account the safety instructions above.
2) Insert the plug of the heater into a suitable socket.
3) Turn the thermostat knob fully in a clockwise direction to the maximum setting.
4)
Turn on the power by means of the thermostat switch on the side panel. When the power is on, the power
indicator will light up. Then turn on the heating function by means of the function selector switch "I" on the
side panel. For maximum heat output the selector switch should be turned to the most high-grade "II".
When the desired room temperature has been reached, the thermostat knob should be turned slowly anti-
clockwise until the thermostat is heard to click off and the lights on the element switches are seen to go
out. After this the heater will keep the air temperature in the room at the set temperature by switching on
and off automatically.
MAINTENANCE
Before cleaning or carrying out maintenance on the appliance, switch off the product and disconnect mains power. Use a
soft, damp cloth only and do not use abrasive substances.
Note: Do not submerge any part of the product in the water.
Overheating safety
The heater has been provided with an overheating safety that turns off the heater if there is a technical malfunction or if it is
being used incorrectly. If it happens, you must turn off the heater or pull out the plug. Remove the cause or correct the
malfunction.
After a short cooling down period, the overheating safety automatically switches the unit back on and the heater can be
used again.
5. SPECIFICATIONS
RATED VOLTAGE
AC220-240V/50Hz
POWER
1000W
SPACE(
㎡
)
5-15
Approvals
CE, ROHS
Disposal
Environmental Protection
Waste electrical production should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
KÄYTTÖOHJE (FI)
LUE TÄMÄ KÄYTTÖOHJE HUOLELLA ENNEN TUOTTEEN KÄYTTÖÄ JA SÄILYTÄ OHJE MYÖHEMPÄÄ
KÄYTTÖÄ VARTEN.
SISÄLTÄ:
1.
YLEISTÄ
