centre.
Problem
Possible cause
Treatment
The heater does
not operate, even
when it is plugged
in and the switch,
thermostat are
switched on.
The plug is loose, bad
connection
Pull out the plug, check the
connection of the plug and
socket. Then connect
again.
No power in socket outlet
Insert the plug in a proper
socket
The heating
element glowing
The input voltage is too high
or too low
Use power supply
according to the rating on
the label
The air inlet grill is blocked
Keep the heater far way
from articles like curtain,
plastic bag, paper and other
things which can cover the
inlet or can be easily cover
on the air inlet
The appliance
didn
’t heat up, only
ventilator worked
The switch was not put at
heating setting
Turn the switch to heat
setting
The thermostat operated
Turn the thermostat and
listen if there is open/close
voice. If there is no click and
the thermostat is not
damaged, the heater will
automatic switch on when
the appliance cooled down
The self retting cut-out
operated
Turn the heater off and
inspect the blockage of inlet
or outlet.
Disconnect the
plug and wait at least 10
minutes
for the protection
system to reset before
attempting to restart the
heater.
Abnormal noise
The appliance is not stands
upright
Put the heater on a level
surface
Disposal
Environmental Protection
Waste electrical production should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
