OP BC 800/W ES SP, Руководство по эксплуатации и обслуживанию

Страница: 12 / 81

OP
S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 0303580838
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
12
HANDLING / TRANSPORT
WARNING
The personnel in charge of handling and transportation must pay the utmost
attention in order to avoid the test bench to be submitted to shocks or stresses
that would jeopardize the proper functioning of the machine, and safety of the
operator.
The machine is transportable without disassembling it. In any case, it is important to pay
attention to the following precautions:
In case the machine is transported, or moved, it is suggested to lift it from the bottom side by
using the proper spaces located below the test chamber.
We suggest to be very careful because, since the machine, being long and narrow, can result
to be unstable.
If the machine has to be shipped, ensure that it is firmly secured to the means of transport and
protected against knocks, vibrations or shaking.
LIGHTING:
The bench is provided with one light fixtures that ensure good visibility of the inside of the
chamber. The light go on when the master switch is turned on.
WARNING : Always make sure that the machine is placed on a stable, safe surface and that it
is not causing vibrations that, in addition to being bothersome and useless, may cause
malfunctions.
If the test bench is not placed on a stable and levelled surface, the bench door
might not open.