ooznest WorkBee CNC xPro V3, Сборка и пусконаладка

Страница: 29 / 70

WorkBee CNC Appendix C 27
Sometimes the $$ settings can change value, this usually happens if the machine is
moved around by hand. Re-check all $$ values to make sure they are set correctly.
Problem - Can’t connect to CNC xPro/GRBL is not loading.
First try another USB Cable. Then try another computer. The last thing to try is resetting
the firmware on the controller. To do this download the Arduino IDE: https://www.ardu-
ino.cc/en/Main/Software
Connect the CNC xPro via USB and make sure Universal G-Code sender is closed. Open
the Arduino IDE. In the Arduino IDE set Tools > Board to ‘Arduino/Genuino Uno’. Set
Tools > Port to the port the CNC xPro is connected to. Set Tools > Programmer to
‘AVRISP mkII’
Open Files > Examples > EEPROM > eeprom_clear and then click the upload button
(Second button in from the left, is a arrow pointing to the right) if this gives an error
please contact us. If you get the ‘Done uploading message’ follow these steps to upload
GRBL: https://github.com/grbl/grbl/wiki/Compiling-Grbl