Oontz Angle, Руководство пользователя

Страница: 12 / 17

8. Connecting to non-Bluetooth (AUX-IN) devices
For your device, laptop, tablet or PC that does not have Bluetooth or support for
Bluetooth audio, you can connect and play music and audio by connecting your
device to the
“AUX IN” Jack
on the OontZ Angle with the included 3.5mm audio
cable.
Step 1
– Make sure your OontZ Angle has sufficient charge or connect to charging
source. Turn on the OontZ Angle, by sliding the
“ON/OFF” Switch
to the on
position.
Step 2 – Plug one end of the 3.5mm audio cable into the
“AUX IN” Jack
(see
Section 3: item 6) on the OontZ Angle and plug the other end into the headphone
jack on your device or laptop. You can then play your music and audio on the
OontZ Angle.
IMPORTANT NOTE: When in AUX IN mode the audio controls and the volume is
controlled from the device only. In AUX IN mode the
“VOL+” Button
and the
“VOL-” Button
will not function on the OontZ Angle.
Also Note: When you plug the 3.5mm audio cable into the AUX IN jack of the
OontZ Angle it will take priority over Bluetooth and a Bluetooth device will not be
able to play audio. You will need to remove the 3.5mm audio cable from the OontZ
Angle to play audio from a Bluetooth device
Page 11