17
16
b.
Align the screw holes of
the sensor’s back cover
over the pencil marks
(or the wall anchors).
Place screws through
these gaps and tighten.
c.
Once the back cover
is secure, place the
sensor onto it. The
magnet will hold it
in place.
(optional)
(optional)
Status indicator reference
Additional Information
5
First time setup
– Quick
red flashes
Pairing mode
– Quick
green flashes
Pairing sucess
– Long
green flash
Unpairing sucess
–
Slow red flashes
Motion sensed
– Quick
red flash
Signal disconnected
–
Long red flash
