Onyx RX32 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 24

Onyx RX32 Скачать руководство пользователя страница 16

16

BATTERY POWER METER

The battery power meter will display the

power quantity of the battery. When the

battery is full of power, all indicator lights

will be on. Along with the consumption of

the power quantity, the indicator lights

will go out from the right to the left. To

prolong the life of the battery, do not let

the indicator lights go out to below the

following power consumption.

Hint: To prolong the life of the battery,

please ensure to charge the battery after

the total use time of the machine exceeds

30min.

After each use, the wastewater tank shall be drained and cleaned. The clean water tank shall be periodically

cleaned to remove any corroded parts. Carry the machine to the drainage place, switch off the key of the

power supply, and drain the water according to the following drainage instructions:

DRAINAGE OF WATER TANK

FOR SAFETY: 4.

Before leaving or maintaining the machine:

DRAINAGE OF WASTEWATER TANK

1. Unscrew the drain hose cover of the

waste water tank drain hose counter-

clockwise and drop the hose into waste

water drain.

2. Open the cover of the waste water

tank and flush the waste water tank with

a hose using fresh water.

3. Rinse the waste water filter screen and

remove any debris from inside the waste

water tank.

«
...
14
15
16
17
18
...
»

Содержание RX32

























Отзывы:

Нет отзывов