Note :
Don
’
t care the Tracking group ID if you are not necessary to use the plotter with ONWA AIS tracking buoy.
6) Now you can press [ESC] key to exist the AIS setup. You can check the saved AIS setup information by the
following steps :
6.1) Select AIS screen and press [Menu] -> AIS detail list
6.2) Select
“
000
”
from the list and press [ENT] to check the saved AIS setup information
Note :
A) Enter
“
Tracking group ID
”
if necessary to use with Onwa AIS buoy with programmed to send
“
Onwa
protocol
”
.
Please notice that the
“
Tracking group ID
”
must be same as the
“
Tracking group ID
”
programmed in Onwa
AIS buoys otherwise the AIS buoys could not be displayed on your AIS plotter.