47
VK2-12MP360EXTIR User Manual V1.0
2. Enter the Rule Name and select the Line Event type from the Counter menu. The
Detector will generate an event when an object passes over the set line. Counter
sets the direction and generates an event when an object moves in the set direction
and increases the count. To reset the count, click the Reset button.
3. Set direction of line detection in Direction menu.
4. Enable the on / off toggle switch to on and set the line area in Video Preview
-
Tampering:
1. Click the None menu to change into Tampering.
2. Enter the Rule Name and set the Dwell time. Tampering generates an event if there
is a scene change. Users can adjust the tampering sensitivity in the Sensitivity menu.
3. In the Light Change menu, users can include lighting on / off as a tampering event.
Users can adjust the sensitivity of Light Change in the Light Sensitivity menu.
-
Intelligent Motion:
1. Click the None menu to change into Intelligent Motion.
2. Enter the Rule Name and set the Dwell time. Intelligent Motion generates an event
when motion is detected in the set area. Users can adjust the sensitivity of Intelligent
Motion in the Sensitivity menu.
3. Enable the on / off toggle switch to on and set the Intelligent Motion area in Video
Preview. The Intelligent Motion area is displayed as a blue cell.
NOTE:
When Intelligent Motion is enabled, the existing Motion Detection is disabled.
-
Intrusion:
1. Click the None menu to change into Intrusion.
2. Enter the Rule Name. Intrusion occurs when an object enters, appears or exits
in/from set area.
3. Enable the on / off toggle switch to on and set the Intrusion area in Video Preview.
The Intrusion area is displayed as a yellow cell.
-
Loitering:
1. Click the None menu to change into Loitering.
2. Enter the Rule Name. Loitering generates an event if an object enters a set area and
walks or stays for more than the set time.
3. Enable the on / off toggle switch to on and set the Loitering area in Video Preview.
The Loitering area is displayed as a purple cell.
-
Human:
1. Click the None menu to change into Human.
2. Enter the Rule Name. Human generates and event if the detected object is human.
NOTE:
Conditions for distinguishing human:
-
The object must be 10-20% of the screen size.
-
Head and shoulders should be visible and moving.
The camera may not be able to distinguish human in the following situations:
-
A person who is sitting, crawling, or lying.
