Onvif V972D, Быстрое руководство, Страница: 6 / 16

6
2. Installation
For the network camera to operate, it is necessary to connect a network cable for data transmission and power
connection from supplied power adapter. Depending on operation methods, it is possible to also connect an
alarm cable.
2.1 Overview
Unpacking and Inspection
All Vicon equipment is tested and inspected before leaving the factory. It is the carrier responsibility to deliver
the equipment in the same condition as it left the factory.
Inspection for Visible Damage
Immediately inspect the cartons upon delivery. Make a note of any visible damage on all copies of the carrier’s
freight bill.
Make sure the carrier’s agent (the person making the delivery) signs the note on all copies of the bill. If the
agent does not have claim forms, contract the carrier’s office.
Inspection for Concealed Damage
As soon as possible after delivery, unpack the unit and inspect it for concealed damage. Do not discard the
carton or packing materials. If the unit is damaged, contact the carrier immediately and request forms for filing
a damage claim. Make arrangements for a representative of the carrier to inspect the damaged equipment.
If the equipment must be returned for repair, follow the Shipping Instructions at the end of this manual.
Mounting the Unit
Select a location for the installation of the camera. Be sure the area around the selected location is clear of
obstacles (such as steel beams, headers, pipes, electrical wiring, etc.) which would interfere with the mounting
of the camera and that the location can support the weight of the unit. Video and power cables must be routed
to the installation location.
Caution: Do not attach these units to drywall surfaces and do not install mounting screws into the end grain
of wood.