Onvif IPMV3FI, Руководство по установке

Страница: 11 / 14

11
111114
2.3 Resetting to the factory default settings
To reset the network camera to the original factory settings, go to the Setup
>
System
>
Maintenance web page (described in “System
>
Maintenance” of User’s Manual) or use
the Reset button on the network camera, as described below.
•
Using the Reset button:
Follow the instructions below to reset the network camera to the factory default settings us-
ing the Reset button.
1. Switch off the network camera by disconnecting the power adapter.
2. Press and hold the Reset button while reconnecting the power.
3. Keep the Reset button pressed during about 2 seconds or more.
4. Release the Reset button.
5. The network camera resets to factory defaults and restarts after completing the factory
reset.
CAUTION: When performing a Factory Reset, you will lose any settings that have been
saved. (Default IP 192.168.30.220)
Reset Button