Installation guide
Please install with the supporting devices.
Installation
Please confirm the following things before installation:
1. Whether POE port power supply power meet the power requirement of the connected devices or not .
2. Whether the POE standard requirements and power supply mode match with the powered devices or not ,
Mid-span : 4,5+; 7,8-/ End-span : 1,2+; 3,6-;
3. Whether the power of the matched power adapter is consistent with the label specification requirement of
the Ethernet switch
Please install the POE injectors as per following steps :
1. Put POE injectors on big enough and steady desk
2. Use the power adapter to connect with power input port , and use power cable to connect the power socket.
3. Connect network devices with the Ethernet port via network cable
!
Power
If initialization is inconsistent with the above, please check the power.
Note
!
Note
1. Don’t put any heavy goods on the POE injectors and make sure POE injectors get excellent ventilation and heat
dissipation environments
2. Please turn off the power before hot plugging
Connect with power cable , insert jack , turn on the power . After startup, the LEDs shows following conditions :
1. Power LED indicator is on all the time
2. After the POE port connects with PD , POE indicator is ON.
