Note
：
Please confirm that the PD devices are complying with IEEE802.3af/at standard.
!
Indicator Description
Power
LED
：
PWR
Yellow LED ON
Normal
Power
Supply
OFF
Power
OFF
PoE Working LED:PoE
Green
LED
ON
Connected
the
PD
Device
,
Working
Normally
OFF
Not
Connected
the
PD
Device
or
Power
OFF
Green LED Blink
Green
LED
ON
Link/ACT LED
Green LED Blink
Data
Transmission
Normally
Green
LED
ON
Connected Normally and Working Normally
OFF
Not
Connected
Indicator
Status
Description
POWER
PORT
Gigabit switch series products comes with built-in power, no power adapter,
AC100 ~ 240V, 50/60Hz
：
PoE PORT
PoE port with PoE function, w
：
hich can transmit data and power simultaneously if connected
matching device. The LED lights on the front panel can show working status of each port.
Ethernet
PORT
：
B
eside PoE port, other ports are Ethernet RJ45 port, and all RJ45 port support Auto
MDIMDIX, plug and play. The LED lights on the front panel can show working status of each port.
SFP LED
Data
Transmission
Normally
Connected Normally and Working Normally
OFF
Not
Connected
Green LED Blink
Short Circuit or Current Overload
Installation
Please confirm the following things before installation:
1. If the POE port power meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(1/2+
、
3/6-( End -span)/ 4/5+
、
7/8-(Mid-span))
3. If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table.
2 .Connect the power outlet through the power cable.
3 .Connect the network devices to the POE switch port though network cable.
Installation Guide
!
!
Please install with the matched devices.
Note:
1. Please do not put heavy products on the POE switch, and please ensure good ventilation environment
for the POE switch.
2. Please cut off the power first before plugging the power adapter.
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the
restoration is successful.
2. Power LED remains lit.
Power
Note:
If initialization is inconsistent with the above, please check the power.
Connection Diagram
Cat
.5 C
able
Pow
er
PoE S
witc
h
PoE 3
302
4PF
Mo
nito
r
Cat
.5 C
able
NV
R
Vid
eo l
ine
Fib
er
me
dia
con
ver
ter
PoE
Cam
era
IP
IP
Cam
era
PoE S
plit
ter
PD 3
101
DC
OU
T
Cat
.5 C
able
PD-Powered Device
Power over Ethernet Splitter
OFF:12V
ON:5V
PoE RUN
PoE IN
DC
OUT
DC
RUN
Ethernet out
IN
OUT
PoE I
P
Cam
era
PoE I
P
Cam
era
Products Model & Description
：
Address
：
Room
1003
,
Block
D
,
Terra
Building
,
Chegongmiao
,
Futian District, Shenzhen, China
Factory
Address
：
No 5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China
Fax
：
0755-33376608
Tel
：
0755-33376606
www.onvcom.com
After installation, please check:
If there is enough space for heat sink; if the power socket is suitable for switch specification; if the
power, switch and rack are properly grounded and if the connection between switch and other net-
work equipments are normal.
Power
Supply Installation
Display
Hangers Installation
Display
Rack
Installation
Display
1
2
3
4
5
6
7
8
100M
1000M
PWR
10
/
100
/
1000
M
PoE
Switch
Power
Over
Ethernat
Gigabit PoE Switch
LINK PoE
ONV-P
3
PF
16-Port 10/100
/
1000M PoE switch
，
transmission
distance
is
100 meter
,
1-16 port support PoE
，
IEEE 802.3af/at,
OE3 016
：
the total power is 250W
,
built
-
in
power
ONV-P
3
PF
24-Port 10/100
/
1000M PoE Switch
，
transmission
distance is 100 meter
,
1-24 port support PoE
，
IEEE 802.3
OE3 024
：
af/at,
the total power is 400W
,
built
-
in
power
L Angle Iron
Screw
Connect
to
Power
The
Gigabit
PoE switch uses AC 100~240V, 50/60Hz power supply
1.Please check if the power supply specification matches with the required;
2.Connect the power cable to AC power socket, shown as in the following pictures
ONV-P
3
PF-
at
16-Port 10/100
/
1000M PoE switch
，
transmission
distance
is
100 meter
,
1-16 port support PoE
，
IEEE 802.3
OE3 016
：
af/at,
the total power is 400W
,
built
-
in
power
ONV-P
3
PF-at
24-Port 10/100
/
1000M PoE Switch
，
transmission
distance is 100 meter
,
1-24 port support PoE
，
IEEE 802.3
，
OE3 024
：
af/at
the total power is 600W
,
built
-
in
power
