!
Note
：
Please confirm that the all the PD devices are complying with IEEE802.3af standard.
PoE Priority: This function will protect the switch when it is overloaded, if all devices consumption are higher than specified, switch
ports will be sorted by priority, Port 1, Port 2, Port 3, etc. Then the power supply of lowest priority will be turned off.
Power Plug / Adapter: Please only use the included power supply as the switch may be damaged if mismatched power is applied.
PoE Port Indicator Lights: There are indicator lights on the front panel that will show you if the switch is supplying power to a PoE
capable device.
Network Traffic Indicator Lights: There are lights on the front panel that will show if your plugged in device is transmitting /
receiving network data at an appropriate rate.
Indicator description:
!
Installation guide
Please install with the supporting devices.
Installation
Please confirm the following things before installation:
1. If the POE ports meets the power requirement of the connecting devices.
2. If the POE standard requirements and power supply matches with the power receiving device
(1/2+
3/6-( End -span))
3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table.
2. Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3. Connect the network devices to the POE switch port with network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1 All lights will flash brightly except for the PoE ports, which means a successful power boot has occured.
2 Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!
Note
Connection Diagram
Model Descriptions and Installation
www.onvcom.com
Tel:+86-755-33376606 Fax:+86-755-33376608 Email:[email protected]
Address: Room 1003, Block D , Tairan building , Chegongmiao, Futian district ,Shenzhen ,China
Factory address:No 4-5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China
Indicator
Status
Description
Power Indicator: PWR
Green LED ON
Normal
PoE
Indicator:
PoE
100/1000M Indicator:
Act/Link
OFF
Power OFF
Green LED ON
Connected PD, working properly
Green LED Blink
Short circuit or current overload
OFF
No Connected PD or Power OFF
Yellow LED Blink
Data transmission properly
Yellow LED ON
Network link is connected normally
OFF
No connected network device
Green LED ON
Connected with 1000Mbps
network device
OFF
Connected with 10/100Mbps network device
SPD Indicator: 1000M
PWR
LINK
PoE
22
44
66
88
1
1
33
55
77
8-Port 10/1 2-Port Gigabit
TP/SFP
Switch
Combo
PoE
G2
/T
P
G2
/T
P
G2
/S
FP
G2
/S
FP
G1
/T
P
G1
/T
P
G1
/S
FP
G1
/S
FP
Link/Act
Speed
W
AN
PO
E31
108
PFB
Pow
er
Cat.
5/5
e/6
Cat.
5/5
e/6
ONV-POE31108PFB
: 8x 10/100M ports +2* Gigabit Combo Ports PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 130W.
ONV-POE31108PFB-at
: 8x 10/100M ports +2* Gigabit Combo Ports PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 250W.
ONV-POE31108PFM
: 8x 10/100M ports +2* Gigabit Combo Ports managed PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 130W.
ONV-POE31108PFM-at
: 8x 10/100M ports +2* Gigabit Combo Ports managed PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 250W.
ONV-POE31108P
: 8x 10/100M ports +2x 10/100M Uplink port PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 130W.
ONV-POE31108P-at
: 8x 10/100M ports +2x 10/100M Uplink port PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 250W.
