Indicator description:
System Indicator
：
SYS
Green
LED
Blink
Working normal
OFF
Working
abnormal
or
powered off
PoE Indicator
：
PoE
Green LED ON
Connect with PD, and working normal
Port short circuit or over current
Green
LED
Blink
OFF
No
PD
connected
or
not
supply power
Indicator
：
Link
Yellow
LED
ON
Data
under
transmission
Yellow LED Blink
Connected and data under transmission
OFF
No
network
device
connected
Indicator
Status
Description
Note
：
Please confirm that the all the PD devices are complying with IEEE802.3af/at standard.
!
Power Industrial Terminals
: 48 (48 ~57V)VDC, dual redundancy ( More than 50VDC recommended when used PoE+
output), please use AC100~240V, 50/60Hz power supply;
PoE Port
: The PoE ports support PoE function, which can transmit data and power simultaneously if connected matching
device. The LED lights on the front panel can show working status of each port.
Ethernet Port
: beside PoE port, other ports are Ethernet RJ45 port, and all RJ45 port support Auto MDIMDIX, plug and
play.The LED lights on the front panel can show working status of each port.
Please install with the supporting devices.
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(1/2+
、
3/6-( End -span)/ 4/5+
、
7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table.
2. Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3. Connect the network devices to the POE switch port though network cable.
Note:
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for
the POE switch.
2.Please cut off the power first before plugging the power adapter.
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1.Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the
estoration is successful.
2.Power LED remains lit.
Installation guide
!
!
Connection Diagram
Model
Descriptions
Tel:+86-755-33376606 Fax:+86-755-33376608 Email:[email protected]
Address: Room 1003, Block D , Terra building , Chegongmiao, Futian district ,Shenzhen ,China
Factory address:No 5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China
www.onv.com.cn
ONV-IPS33064PFM:
Industrial Ethernet PoE Switch, 4x 10/100/1000M PoE Ports, 2x Gigabit Optical Ports. PoE port is compatible with
IEEE802.3af/at, max power for each port is 30W. It also support SNMP Management Protocol. The RJ45 transmission
distance is 100m, the SFP optical port transmission distance is 2-120km. The power adaptor and SFP module are not included.
Uplink
Gigabit SFP
Optical Port
Green
LED
ON
Data
under
transmission
Connected and data under transmission
Green
LED
Blink
OFF
No
data
connected.
6-Port 10/100/1000M
Managed Switch
Ind
ustr
ial
PoE
Sw
itch
IPS
330
64P
FM
W
ide
Are
a N
etw
ork
Note:
If initialization is inconsistent with the above, please check the power.
Power
