OPERATION
1)
Charge it.
Charger m
odel SMC-5
I
t’s recommended to charge your Bluetooth® Sound Art™ speaker unit completely after unpacking.
When powering on the speaker, and if the battery is low in charge,the Red LED (next to micro USB) and
Blue LED (next to Power key) will blink together.
Once your speaker is mounted on the wall or set on your desk
,
you may leave the unit ON. Your speaker
will automatically enter a power saving mode when not in use.
Your
Bluetooth®
Sound
Art™
speaker can be played and
recharged at the same time.
Your
Bluetooth®
Sound Art™ speaker will
give
you
many
hours
of enjoyable
wireless
play
time
on
a single charge.
When it’s time to recharge, it will let you
know
by
flashing
its low
battery
indicator continuously.
&RQQHFW
WKH
ZDOO
FKDUJHU
XQLWWR DQ $& RXWOHW DQG WR
WKHPLFUR 86% MDFN ORFDWHG RQ
UHDUHGJHRIVSHDNHU
After charger cable is plugged into micro USB jack ,the two LEDs will stop blinking. The Red LED
will remain
lighted. After the speaker has been charged,
the Green LED will light. When the micro USB cable has
been unplugged,
the
Green LED will turn off.
* Note- This SoundArt
™
speaker has 2nd AUX DC
power
jack.
If you prefer,
it can be connected,
by
itself, to the wall
charger permanently, without
the
need to re-charge.
It
is hidden on rear side of
speaker
cover,
shown here.
micro USB jack
micro USB cable
Wall Charger
4