HOBO® Waterproof Shuttle (U-DTW-1) Manual
10264-H MAN-U-DTW-1
The HOBO Waterproof Shuttle performs several major functions:
•
Reads out all logger information (serial number, deployment number, data, etc.) from
loggers in the field for transfer to host computer, and stores each logger’s data in a
“bank”
•
Nonvolatile memory preserves data, even if batteries are depleted
•
Relaunches the logger, resetting the logger’s time to the shuttle’s time and
synchronizing the logging interval on relaunch
•
Can be used as an optic-to-USB base station
Although the HOBO Waterproof Shuttle is easy to use, Onset strongly recommends that you
spend a few minutes reading this manual and trying out the procedures described here before
taking the shuttle into the field.
Specifications
Compatibility
All HOBO U-Series loggers with optic USB. Not compatible with the HOBO
U-Shuttle (U-DT-1).
Data Capacity
63 logger readouts of up to 64K each
Operating Temperature
0° to 50°C (32° to 122°F)
Storage Temperature
-20° to 50°C (-4° to 122°F)
Wetted Materials
Polycarbonate case, EPDM o-rings and retaining loop
Waterproof
To 20 m (66 feet)
Time Accuracy
±1 minute per month at 25°C (77°F); see Plot A
Logger-to-Shuttle Transfer
Speed
Reads out one full 64K logger in about 30 seconds
Shuttle-to-Host Transfer
Speed
Full shuttle offload (4 MB) to host computer in 10 to 20 minutes,
depending on computer
Batteries
2 AA alkaline batteries required for remote operation
Battery Life
One year or at least 50 complete memory fills, typical use
Weight
150 g (4 oz)
Dimensions
15.2 x 4.8 cm (6.0 x 1.9 inches)
The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU). To maintain CE compliance, this
product must be used with the supplied USB cable or equivalent (less than
3 m long).
Plot A
-140
-120
-100
-80
-60
-40
-20
0
20
40
-20
0
20
40
60
Temperature (°C)
T
im
e
bas
e Er
ro
r (
p
p
m
)
HOBO Waterproof Shuttle
U-DTW-1
Included Items:
•
USB cable
•
Set of couplers;
For UA Pendant
(COUPLER2-A)
For U20 Water Level
(COUPLER2-B)
For U22 Water Temp Pro
v2, U24 Conductivity, and
U26 DO (COUPLER2-C)
For UTBI TidbiT v2
(COUPLER2-D)
For U23 HOBO Pro v2
(COUPLER2-E)
Required Items:
•
HOBOware 2.2 or later
•
Compatible logger and
matching coupler
