Smart Sensor Expander
10.
Open the channel and locate it below the knocked out
opening, with the hinged side on left and the
taper
facing in
. Place the large plug into the large groove at
leftmost end, centering the thick part of the plug in
groove. (The plug ‘tail’ can face in or out.) Lay the
sensor cables into
the small
grooves. Use the
small plugs to fill
any unused
grooves (again,
center the thick
part of the plugs
in the grooves
with the ‘tails’ facing in or out).
2
11.
Close the channel, making sure the cables and any plugs
remain in their grooves, and press into the opening. To
reduce the amount of excess cable in the case,
gently
pull the cables towards you as you press the channel
into place. Press channel in until it is flush with the
outside of the case. (When fully seated, channel will
project slightly into the
inside of case.)
12.
Screw the retaining bar into
the bottom pair of threaded
inserts. The bar should be
flat against the case. Be
careful not to overtighten
the thumbscrews.
13.
Re-connect cables
through the top
opening and re-install
top channel and the
two retaining bars.
Service and Support
As part of Onset’s ongoing efforts to provide 100% customer satisfaction,
our Continuing Engineering Group constantly monitors and evaluates all of
our products and software. In the unlikely event any significant defect is
found, Onset will notify you. If you find a defect, please e-mail us at
loggerhelp@onsetcomp.com.
HOBO products are easy to use and reliable. In the unlikely event that you
have a problem with this instrument, contact the company where you
bought the logger: Onset or an Onset Authorized Dealer. Before calling,
you can evaluate and often solve the problem if you write down the events
that led to the problem (are you doing anything differently?) and if you visit
the Technical Support section of the Onset web site at
www.onsetcomp.com/support.html. When contacting Onset, ask for
technical support and be prepared to provide the product number and serial
number for the logger and software version in question. Also completely
describe the problem or question. The more information you provide, the
faster and more accurately we will be able to respond.
Warranty
Onset Computer Corporation (Onset) warrants to the original end-user
purchaser for a period of
one year
from the date of original purchase that
the HOBO® product(s) purchased will be free from defect in material and
workmanship. During the warranty period Onset will, at its option, either
repair or replace products that prove to be defective in material or
workmanship. This warranty shall terminate and be of no further effect at
the time the product is (1) damaged by extraneous cause such as fire, water,
lightning, etc. or not maintained in accordance with the accompanying
documentation; (2) modified; (3) improperly installed; (4) repaired by
someone other than Onset; or (5) used in a manner or purpose for which the
product was not intended.
large plug
taper faces in
THERE ARE NO WARRANTIES BEYOND THE EXPRESSED
WARRANTY ABOVE. IN NO EVENT SHALL ONSET BE LIABLE
FOR LOSS OF PROFITS OR INDIRECT, CONSEQUENTIAL,
INCIDENTAL, SPECIAL OR OTHER SIMILAR DAMAGES
ARISING OUT OF ANY BREACH OF THIS CONTRACT OR
OBLIGATIONS UNDER THIS CONTRACT, INCLUDING BREACH
OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, OR ANY
OTHER LEGAL THEORY.
Limitation of Liability.
The Purchaser's sole remedy and the limit of
Onset's liability for any loss whatsoever shall not exceed the Purchaser's
price of the product(s). The determination of suitability of products to the
specific needs of the Purchaser is solely the Purchaser's responsibility.
THERE ARE NO WARRANTIES BEYOND THE EXPRESSED
WARRANTY OFFERED WITH THIS PRODUCT. EXCEPT AS
SPECIFICALLY PROVIDED IN THIS DOCUMENT, THERE ARE
NO OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTIBILITY OR FITNESS FOR A PARTICULAR
PURPOSE. NO INFORMATION OR ADVICE GIVEN BY ONSET,
ITS AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY
OR IN ANY WAY INCREASE THE SCOPE OF THE EXPRESSED
WARRANTY OFFERED WITH THIS PRODUCT.
Indemnification.
Products supplied by Onset are not designed, intended, or
authorized for use as components intended for surgical implant or ingestion
into the body or other applications involving life-support, or for any
application in which the failure of the Onset-supplied product could create
or contribute to a situation where personal injury or death may occur.
Products supplied by Onset are not designed, intended, or authorized for use
in or with any nuclear installation or activity. Products supplied by Onset
are not designed, intended, or authorized for use in any aeronautical or
related application. Should any Onset-supplied product or equipment be
used in any application involving surgical implant or ingestion, life-support,
or where failure of the product could lead to personal injury or death, or
should any Onset-supplied product or equipment be used in or with any
nuclear installation or activity, or in or with any aeronautical or related
application or activity, Purchaser will indemnify Onset and hold Onset
harmless from any liability or damage whatsoever arising out of the use of
the product and/or equipment in such manner.
Returns
Please direct all warranty claims and repair requests to place of purchase.
Before returning a failed unit directly to Onset, you must obtain a Return
Merchandise Authorization (RMA) number from Onset. You must provide
proof that you purchased the Onset product(s) directly from Onset
(purchase order number or Onset invoice number). Onset will issue an
RMA number that is valid for 30 days. You must ship the product(s),
properly packaged against further damage, to Onset (at your expense) with
the RMA number marked clearly on the outside of the package. Onset is not
responsible for any package that is returned without a valid RMA number
or for the loss of the package by any shipping company. Loggers must be
clean before they are sent back to Onset or they may be returned to you.
Repair Policy
Products that are returned after the warranty period or are damaged by the
customer as specified in the warranty provisions can be returned to Onset
with a valid RMA number for evaluation.
ASAP Repair Policy.
For an additional charge, Onset will expedite the
repair of a returned product.
© 2007 Onset Computer Corporation. All rights reserved.
Manual Part No: MAN-S-ADAPT-X5-10
Doc No: 11887-A
Onset and HOBO are registered trademarks of Onset Computer Corporation.
Other products and brand names may be trademarks or registered trademarks
of their respective owners.
www.
.com
information@itm.com
1.800.561.8187