minut
Pocket 3G & Broadband 11n Router
31
www.onnettechnologies.com
Chapter 7 Wireless Network Configurations
7.1
Basic Settings
Wireless Network :
•
Network mode:
Wireless application standards for the router. The router supports 802.11b, 802.11g, and 802.11n or
mix modes.
•
Multiple SSID:
Network name of the wireless signals. This router supports multiple wireless networks. If you
select “Hidden the Wireless Client”, you cannot scan the router's SSID. If you select “Isolated”, you can prevent
other users under the same network between the transmission of the virus.
•
Broadcast network Name:
You can select “Disable” to forbid the router to broadcast SSID. After that, the
wireless clients cannot scan the router's SSID. The clients cannot communicate with the router if they fail to know
the router's SSID. The broadcast network identifier is defaulted as “Enable”.
•
AP Isolation:
Isolated at the AP level. After it is enabled, clients at the AP level cannot visit each other, which
could prevent the virus from spreading.
•
MBSSID AP Isolation:
Isolated from areas outside this AP. Other clients not belonging to this AP shall not visit
clients under this AP.
•
Basic service set identifier:
Business group identifier of the wireless network. In terms of IEEE 802.11, the
BSSID is the MAC address of the wireless AP.
•
Frequency (channel):
Channels currently used by the router. Other effective work channels could be selected
from the following list and options are 1 to 14.
•
Rate:
You can set the data transfer rate through the router, the default settings is "Auto".
•
HT TxStream:
WIFI number of channels for simultaneous transmission of data.
•
HT RxStream:
WIFI also accept the number of data channels.
