background image

10

  Master Volume Feature

Master Volume Feature

The Master Volume Feature allows you to select 
a single device (TV or audio receiver) that the 
volume control always controls. For example, 
the remote can be in TV mode while the volume 
buttons control the volume on your audio receiver 
instead of your TV. 

Enabling the Master Volume Feature

1.  Press and hold the 

SETUP

 button 

until the red indicator stays on 
(approximately 4 seconds) and then 
release the button.

2.  Press and release desired device 

button (

TV, DVD, SAT, AUX

) for the 

device you wish to setup to control 
the volume.

3.  Press and release the 

MUTE

 button.

4.  Press and release the 

VOL +

 

button. The red indicator will blink 
twice and then go off. 

To test the feature put the remote in 
another mode such as the TV mode 
if you programmed the audio receiver 
to be the Master Volume Device. 
Point the remote at the audio receiver, 
press and hold either the 

VOL +

 or 

the 

VOL -

 button. If the audio receiver 

volume changes then the remote is 
programmed correctly. If the TV volume 
changes and not the audio receiver, 
you will have to repeat the steps above 
and test again.

Disabling the Master Volume Feature

1.  Press and hold the 

SETUP

 button 

until the red indicator stays on 
(approximately 4 seconds) and then 
release the button.

Содержание 39900














Отзывы:

Похожие инструкции для 39900