12
SETUP - LEARNING
SETUP - VOLUME LOCK
• If you find one or more keys don’t work properly after set up, you can
re-enter the learning mode at any time by repeating the procedure
from step 1.
• If one or more of your original remotes aren’t working, you can still
set up the ONN remote by SimpleSet or Code Set Up.
Deleting a learned function
If you want to delete a learned function and return that key to its
original state, you can use the following procedure:
1. Press the Device key for the device your learned function operates
2.
Hold down the Setup key until the LED under the
Device key blinks twice
3.
Press 976 – the LED should blink twice
4. Press the key you want to reset twice – the LED should blink twice
and the learned function has been deleted.
If you primarily use one device for controlling sound, for example a
Sound Bar or Audio Video Receiver, it’s possible to program your ONN
remote to only control that device when you use the Volume Up, Down
and Mute keys. To do this:
1.
Hold down the Setup key until the LED under the
Device key blinks twice.
2.
Press 993 – the LED should blink twice.
3.
Press the device key for the device to always control
volume – for example Audio.
4. The LED will blink twice.
From now on, pressing the Volume Up, Down or Mute keys will always
control the the above programmed device, no matter what device you
are controlling.
ONN_6_Eng_Manual RDN1010321.indd 12
ONN_6_Eng_Manual RDN1010321.indd 12
26-02-2021 14:28
26-02-2021 14:28
