Onn 100010113, Руководство по эксплуатации продукта, Страница: 7 / 9

MIN: 5.5" (140mm)
2.36" (60mm)
6
Level
Hold Hanging template against
wall at desired position, use a pencil to mark
4 hole locations.
Pre-drill marked 4 holes by 3/8" size
Masonry Drill Bit to a depth of 2.36".
Insert Anchors into wall and use
hammer to lightly tap them into wall.
Fix Wall plate to the wall with
M7x55mm Lag bolts .
DANGER
Concrete, Stone or Masonry Installation
CAUTION
:
The concrete wall minimum thickness is 5.5", and surface covering can't be more
than 3/8".
CAUTION: These anchors are for concrete, stone or masonry wall ONLY. Do not install into
wood stud.
CAUTION: This product can only be installed on a perpendicular wall. Do not install this
product on the ceiling.
Masonry Drill Bit
3/8" (10mm)
Socket Set
1/2" (13 mm)