Onn 100006556, Быстрый старт, Страница: 5 / 6

Let’s Get Started! Load a Record
Here’s what you’ll need to do
to start playing:
01
• Place your record on the platter.
• Set the speed selector dial to match your
record type - 33, 78, or 45. If you are playing a
45rpm record, be sure to use the adapter.
• Remove the protective cover on the stylus, then
release the lock on the tone arm.
• Use the tone arm lift switch to raise the tone
arm upwards, then carefully move it into position
over the record.
• As the tone arm moves into position, the platter
will start spinning. Use the tone arm lift switch to
lower the tone arm stylus onto the record. When
the stylus comes into contact with the grooves
on the record, the turntable will send audio to
the connected speakers.
1. Plug in the AC power cord.
2. Balance the tone arm counterweight.
3. Assemble the platter to the deck, looping the
drive belt around the motor spindle.
2
1
3