IGN100 Industrial Computer
5
3 - Safe Use and Installation Instructions
WARNING:
There is danger of explosion if the CMOS battery is replaced incorrectly.
Wireless
If this product was configured with a wireless device, the FCC and IC IDs will be detailed on a label on the chassis.
1.
Do not open or modify the device. The device has been tested and complies with FCC and CE regulations. Modification of the
device will void these certifications.
2.
Install the device securely. Be careful handling the device to prevent injury and do not drop.
3.
Wall or ceiling mounting device requires use of a mounting plate or pair of mounting brackets. Plate or brackets must be of
metal construction and have a minimum thickness of 1mm.
4.
Use M3x0.5mm Flat Head screws to attach mounting plate or mounting brackets to threaded holes on bottom of chassis.
Screws should be minimum length of 4mm. Add 1mm of screw length for every mm of additional thickness of plate or bracket
beyond 1.5mm.
5.
Operational temperature must be between 0-50°C, or 0-40°C when using the UL listed configuration, with a noncondensing
relative humidity of 10-90%.
6.
The device can be stored at temperatures between 0-60°C.
7.
Keep the device away from liquids and flammable materials.
8.
Do not clean the device with liquids. The chassis can be cleaned with a cloth.
9.
Allow at least 2 inches of space around all sides of the device for proper cooling. If device is mounted to vertical surface then
recommended device orientation is so that heatsink fins allow air to rise unobstructed. Alternative orientations may result in
reduced operational temperature range.
10.
This device is intended for indoor operation only.
11.
Use UL listed external power supply with rated output 9Vdc, 4.0A min. to 24Vdc, 1.5A min., NEC Class 2, or LPS output or
equivalent.
12.
Install the device only with shielded network cables.
13.
Service and repair of the device must be done by qualified service personnel. This includes but is not limted to replacement of
CMOS battery. Replacement CMOS bettery must be of same type as original.
14.
Proper disposal of CMOS battery must comply with local governance.